It is very difficult to recomend any equipment without knowing your plans. This will all really depend on your end goals; how much you want to spend, what you want to print, and how much effort or time can you put into the endeavor. Therefore I would first start by thinking about what type of printing you want to do and how complicated do you want to get with it to start. Then you can look at what is available to do the job within your budget. Many of the lower end screen printing kits may just give you a bad experience and turn you off because they really don’t set you up with the proper tools to do what you want. In the end with screen printing equipment it is always best to spend a little more to get the right tools rather than going real cheap only to find out you need real equipment to do the printing you want to do. You might want to look at the Amazon.com listing on my website. There you can find hobby grade supplies that you can pick and choose from to create your own printing scenario. You can find hinge clamps, screens, squeegees and inks that you can piece together as needed:

http://www.catspitproductionsllc.com/am ... plies.html

If you want a decent bench alone press you can find them here:

http://www.catspitproductionsllc.com/ra ... pment.html

Then you can find the startup kits with those bench presses I recommend here:

http://www.catspitproductionsllc.com/ra ... -kits.html

I hope that helps you out a bit. Feel free to ask questions anytime and let me know if I can help you out with any RANAR equipment or kits.