Jonathan,

What pallet tape are you using? I do not need it for printing tees but it would be nice to have when printing hoodies. I do not see any in the Catspit store.

Thanks!

I just use my application tape that I have for sign vinyl use. Works great and is generally cheaper than pallet tape.

I use R tape brand on my boards in the lab. It seems to hold up to the flash cure unit better than some.

Yeah I am still sourcing that. I don't use any special brand. As long as it peels form the roll okay it should be fine.

I should be adding this product very soon however.

ApeShirt wrote:I just use my application tape that I have for sign vinyl use. Works great and is generally cheaper than pallet tape.

Don't have a clue what that is but where can I find it? Hopefully Jonathan can get something in his store but I am in need of something pretty quickly and as cheap as possible...the clean up after a run of hoodies can be a pain. End up having to use the very smelly but very good RhinoTech press/screen wash to cut through it but makes the house stink for hours.

Thread dredge

When using pallet tape, are you still using a platen adhesive? If so, I assume the tape is strong enough not to come up when removing shirts from the pallet??

Just wanted to add that I did watch your video about applying the pallet tape, just didnt see anything about the adhesive.

So yes you will want to use spray tack or an adhesive when using standard pallet tape. The tape will normally stay on the pallet.

thanks