I've been hearing a lot about Saati emulsions lately. I've always used Chromablue, Chromaline. I have a vacuum light box set up; seven 24" flourescent bulbs about 5" from the glass. I expose chromablue at about 50 seconds. If I were to try Saati, what kind should I get that would keep me in that same exposure time range, or less?

Also, can you tell me how Saati might be better than Chromablue?


Thanks for the help

If you want a photopolymer then Textil PC Blue and Textil PHU Blue will be way fast. With these emulsions on a black lamp industrial fluorescent exposure unit it's about 1 minute or less normally about 35 to 45 seconds. On an LED unit it's like 12 seconds.

http://catspitscreenprintsupply.com/saa ... on-gallon/

http://catspitscreenprintsupply.com/saa ... on-gallon/

Let me just say this. I SOLVE tons of peoples problems with my Saati emulsions. It's an excellent emulsion and it will perform.

Textile PC Blue detail close up....