placing shirt on pallet

This section is for issues relating to setting up print jobs on automatic, manual rotary or fixed station printing presses. Topics like registration, off contact, micro registration and how to use a manual textile press with the flash cure on multiple color print jobs. Automatic press set up, usage and auto features may also be discussed here.

Moderators: Shamax, Leadfoot, ApeShirt, Catspit Productions

tee stooge
Screen Trooper
Posts: 11
Joined: Wed Mar 06, 2013 8:07 pm

placing shirt on pallet

Post by tee stooge »

ok the next thing I would like to master is how to place the shirt on the pallet with out having to measure first. I have been measuring the shirts and placing a piece of tape to mark the center of the shirt. I also have a center line on the pallet and line them up. is there an easier way? measuring each shirt take a lot of time. I have watched catspit and other videos what do you guys use as a reference lining up the shirts?

Thanks again in advance.
Moe
ApeShirt
Master Screen Printer
Posts: 382
Joined: Fri Apr 13, 2012 1:11 pm
Location: Lansing, MI
Contact:

Re: placing shirt on pallet

Post by ApeShirt »

Really it just takes practice. I look to see if my sleeve seams are pretty much the same distance from the edges of the platen.
Greg
If you're not going to go all the way then why bother going at all.
ApeShirt Apparel Printing, LLC
Post Reply