Hello!
I am having an issue with a left chest design not washing out completely (the finer details) after shrinking it from 3.85" to approximately 2.5" but changing nothing else. I used the same mesh count and exposure time. Suggestions?
Thanks for all the great info!
Jennifer
Detail Not Washing Out
Moderators: Shamax, Leadfoot, ApeShirt, Catspit Productions
-
- Squeegee Master
- Posts: 40
- Joined: Mon Oct 28, 2013 11:33 pm
Re: Detail Not Washing Out
If the details got finer you may have over exposed, hard to say without seeing it. Maybe try again on a higher mesh?
-
- Screen Trooper
- Posts: 5
- Joined: Wed Aug 13, 2014 2:20 pm
Re: Detail Not Washing Out
That's what I did and I also decreased the exposure time slightly. I got it to work.
Thanks so much for your help!
Jennifer
Thanks so much for your help!
Jennifer
-
- Squeegee Master
- Posts: 40
- Joined: Mon Oct 28, 2013 11:33 pm
Re: Detail Not Washing Out
Right on.