Garage setup

This is the place to talk about what it takes to get started. This would include what equipment to buy, space requirements, electrical needs and anything related to getting ready to begin screen printing. Have a question regarding what it takes to screen print tee shirts? Please post them here...

Moderators: Shamax, Leadfoot, ApeShirt, Catspit Productions

Lottie05
Screen Trooper
Posts: 17
Joined: Fri Feb 08, 2013 9:00 am

Garage setup

Post by Lottie05 »

Hey guys I will be using my garage as my work area, wanted to know what my options are when I need to use water on the screens since there isn't a sink or water sprayer in my garage area
ApeShirt
Master Screen Printer
Posts: 382
Joined: Fri Apr 13, 2012 1:11 pm
Location: Lansing, MI
Contact:

Re: Garage setup

Post by ApeShirt »

Run a hose from an outside spigot. Use a spray nozzle. As far as drainage, do you have washout booth? If not get one or build a contraption that will contain the water over spray and splash. Drain it directly into the floor drain or a bucket.
Greg
If you're not going to go all the way then why bother going at all.
ApeShirt Apparel Printing, LLC
Post Reply