Javelin squeegee issues

This is the section concerning all things that relate to printing on press. Topics may include but are not limited to loading the pallets, screen set up, registration problems, squeegee durometer, how to screen print using an automatic, manual rotary press or fixed station presses and general trouble shooting on any print job.

Moderators: Shamax, Leadfoot, ApeShirt, Catspit Productions

Texas inkslingers
Posts: 1
Joined: Mon Dec 11, 2017 7:30 pm

Javelin squeegee issues

Post by Texas inkslingers »

I have a 2001 8/10 tuff javelin. Recently I have been having problems with my squeegees loosing pressure. It flood fine, table goes up, squeegee flips and starts print stroke. It almost immediately flattens out and proceeds to complete strike. I have replaced 2 leaking stroke cylinders and 2 flip cylinders think it was those that are creating the sudden pressure loss making the the loss in squeegee pressure. Can it be a signal issue or something else.
User avatar
Catspit Productions
Site Admin
Posts: 1995
Joined: Wed Mar 21, 2012 10:47 am
Location: Phoenix, Arizona

Re: Javelin squeegee issues

Post by Catspit Productions »

That's probably a question best answered by Workhorse. But you never know, maybe someone who has had this problem will see this and help out.
Jonathan Monaco
Catspit Productions, LLC
Learn how to screen print tee shirts!

http://catspitscreenprintsupply.com/
http://www.youtube.com/user/CatspitProductions
Post Reply