I took it to mean they didn't know, come on, stir it. I rated it right up there with the response I got on Facebook from another screenprinter "looks like your formula is wrong" and when I ask what was wrong, nothing in response. I am mixing 100 grams of product here not a bucket. I have d...

They are all the same product, and I did call support. After several moments of silence, I got, "stir it a little more, maybe even use a mixing paddle."

I have a question about water based discharge. I am mixing 5773 (Khaki) 90% clear discharge base, 10% CMS pigments, and 6% activator. The pigments are Yellow, Reflex Blue, Black and White. The base and pigments mix fine, when I add the activator and let it sit and come back and stir it again it seem...

Can you furnish me with the dimensions of the Exposure unit, basically the foot print (width and depth).

What is your stock ink for the Harley orange?

The gray shirt is only Light gray ink and clear (no reducer) and not alot just dipped the edge of the squeege in ink on another screen and mixed it on screen and printed. Now the Orange is has reducer (amounts shown in previous post). Got my 86 mesh screens and will try the clear again in one of the...

Here are some pictures of the shirts, they have not be washed yet, they are Gildan Ultra Cotton 6.1 oz. Like I said 156 screen, 1/8" off contact, 70 duo squeege PFPFP, and cured under and 18 x 18 flash dryer. The flashes were for about 5-7 seconds just enoungh that no ink on the finger tip. The...

Jonathan, after your post I started looking into the pallet rubber and the one thing that kept coming up was, "it improved the flash". This was especially true with users of aluminum platens, the platen will asborb the heat from shirt and spread over the entire platen but with the rubber t...

Thanks Shamax, I swear I looked all over the page for anything to do with attachments, but there it is !!

Appreciate the quick reply, want to post some pictures of some work that goes with an earlier post I did, thanks again.

Anybody care to explain how this is done on this forum? Telling me to use the img. dosen't quite do it for me, need more INPUT.

Thanks